Our Facilities | Kendensha Co. Ltd.

Fiber Laser Processing Machine

Manufacturer: AMADA

Model: ENSIS-3015RI

Specification

Rapid feed rate (m/min) : 120:120:80
Maximum processing size (mm) : 3070×1550×200
Processing Size (min. to max. mm) :
Tube 19 - 220
Square tube (equal/unequal) 19 - 150
Rectangle tube ɸ220 or less
Angle (equal/unequal) 19 - 90
Channel, Lightweight channel 19 - 150

In addition to processing flat plates, this machine is equipped with a rotary index that enables high-precision processing of pipes and shaped steel for all-round processing.

Press Brake

Manufacturer: AMADA

Model: HG1703

Specification

Pressurising Capacity ：1700kN
Maximum Bend Length：3110㎜
Stroke Length：120㎜
Approach Speed ：350㎜/s

Our pre-existing press brake is driven by a hydraulic motor only but this one has a support motor as well. Therefore, the bending degree is accurate and free of variations. 。
Since trial bending is not needed thanks to the angle sensor, the waste of material is prevented.

Plasma Cutter

Manufacturer: Daihen

Model: M-35CⅡ

Specification

Cutting Power Device : VRCMC-35
Rated Input : Three-Phase 200/220V
Rated Output : 35A/120V
Output Adjustable Range : 10-35A(10-25A)

Used for various plasma cuttings.

Plasma Cutter

Manufacturer: Hypertherm

Model: POWERMAX 30XP

Specification

Rated Input : Single-Phase 100 / 230V
Cutting Capacity : Plate Thickness 16mm

A small and lightweight cutting machine that is capable of cutting plates of various thickness, from very thin to thick.

TIG Welder

Manufacturer: Panasonic

Model: YC-300TR6

Specification

Welding Power Supply : YC-300TR6
Rated Input : AC200/220V
Adjustable Output Range : 4-300A

Used for welding of KDS Separator’s frame and discharge chute

TIG Welder

Manufacturer: Daihen

Model: M350

Specification

Welding Power Supply : WB-M350
Rated Input：Three-Phase 200/220V
Rated Output : 350A/36V
Adjustable Output Range : 30-350A/12-36V

Used for welding KDS Separator’s frame and discharge chute.
By switching between AC and DC, it can weld aluminium.

TIG Welder

Manufacturer: Daihen

Model: INVERTER ARGO 300P

Specification

Welding Power Supply : VRTP-300
Rated Input : Three-Phase 200/220V
Rated Output : 300A(180A)
Adjustable Output Range : 4-300A(4-180A)

Used for welding KDS Separator’s frame and discharge chute.
By switching between AC and DC, it can weld aluminium.

Laser Welder

Manufacturer: Techno Coat

Model: TL-150

Specification

Average Output : 150W
Output Current : 4-300A
Pulse Frequency : 0.5-1.5Hz
Laser Spot Diameter : φ0.2-2.0㎜

Precise welding, only laser welders can do, is possible. Capable of efficient welding without advanced skills.

Radial Drilling Machine

Manufacturer: TOA KIKAI SEISAKUSHO

Model: TRD-800C

Specification

Spindle Horizontal : 611㎜
Arm Vertical : 557㎜
Spindle Vertical : 220㎜
Swing : 800㎜
Revolving Speed : 85-1380rpm
Spindle Nose Socket : MT-4

Used for drilling thick plates.
Capable of various drillings and tappings.

Multi-Worker (Angle Processing Machine)

Manufacturer: Nitto Kohki

Model: MW-50

Specification

Maximum Processing Angle
SS400:75×75×9(㎜)
SUS304 : 75×75×6(㎜)
Maximum Stroke : 34㎜
Maximum Pressure : 490kN

Mainly used for cutting materials and cutout processing of angles.
By replacing blades, it is capable of various cutouts and punchings.

Corner Shear

Manufacturer: TAKEDA MACHINERY

Model: TC-22N-3

Specification

Pressurisation Capacity : 10ton
Corner Notching : 220×220
Maximum Thickness : 3.2㎜

A small model of shearing machine.
Used for various notching.

Shear

Manufacturer: Aizawa Tekkosho

Model: S1020

Specification

Cutting Capacity : t10㎜×2000㎜

Used for cutting plates.

Multi-Purpose Milling Machine

Manufacturer: Yamasaki Giken

Model: YZ-75

Specification

Table Size : 1300×1300
Main Shaft Revolving Speed : 80-4000rpm
Stroke : X760×Y300×Z500

On manufacturing process of KDS Separator, this is used for hole drillings and shaving chain guide rails.
For other purposes, it can be used for end face processing, tapping and C chamfering.

Multi-Purpose Lathe

Manufacturer: BLUE LINE

Model: AL-6A

Specification

Main Shaft Through Hole: φ120
Center-to-Center Distance : 800
Main Shaft Revolving Speed : 24-1000
Swing on Bed : 520
Swing over Carriage : 295

Used for processing large parts.

Multi-Purpose Lathe

Manufacturer: DMG MORI

Model: MS-1250

Specification

Main Shaft Through Hole : φ52
Center-to-Center Distance : 1250
Main Shaft Revolving Speed : 32-1800rpm
Swing on Bed : 435
Swing on Cross Slide : 250

On KDS Separator production process, this is used for processing various shafts and bearing struts.
For other purposes, it is used for finish processing of end surfaces and centering shafts.

NC Lathe

Manufacturer: TAKAMAZ

Model: X-10

Specification

Fanuc-21TB
S(XZ) : 120×230
Main Shaft Revolving Speed : 3500rpm
8 Stations Turret
Appropriate Machining Diameter : φ80×50
Maximum Bar Diameter : φ35

On manufacturing process of KDS Separator, this is used for lathe machining of various rotating shafts.

CNC Lathe

Manufacturer: DAINICHI

Model: MG75

Specification

Swing on Bed : 750㎜
Swing over Carriage : 460㎜
Distance Between Centres : 1000-4000㎜
Supporting Weight : 1600㎏
Revolving Speed of the Main Shaft : 3-1800

Lathe working on large parts is possible.
On manufacturing process of KDS Separator, it is used for lathe works of shafts.

Multi-Purpose Band Saw

Manufacturer: AMADA

Model: HFA-250

Specification

Cutting Capacity：Log φ250 Bar 300×250
Blade Size：27×0.9×3505
Blade Speed：20-80m/min

Used for cutting materials.
Cutting method and the number of items can be input with NC programme.

Press Machine

Manufacturer: AMADA

Model: SP-30Ⅱ

Specification

Pressurising Capacity : 30ton

Used for various press punchings.

Keyseater

Manufacturer: Takarakikai

Model: TK-60

Specification

Hight : 200㎜
Semidiameter : 420㎜
Table Size : 600㎜
Keyway Cutting Width : 3-25㎜

On manufacturing process of KDS Separator, this is used for keyway cuttings of sprockets and set collars.
Capable of various keyway cuttings.